HSN code for Aluminium and Aluminium Articles

Posted on 10 June 2022 Category : HSN Codes for GST

HSN code CHAPTER-76

Aluminium and articles thereof

The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.

Note:

In this Chapter, the following expressions have the meanings hereby assigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products, which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along them whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

(d) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 7601 00 00), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

i. of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;

ii. of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings 7606 00 00 and 7607 00 00 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygonal, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waited, expanded, cone-shaped or fitted with flanges, collars or rings.

HSN Code Description of goods

HSN code 7601 Unwrought aluminium

7601 10        Aluminium, not alloyed :
7601 10 10    ---    Ingots
7601 10 20    ---    Billets
7601 10 30    ---    Wire bars
7601 10 40    ---    Wire rods
7601 10 90    ---    Other
7601 20    -    Aluminium alloys :
7601 20 10    ---    Ingots
7601 20 20    ---    Billets
7601 20 30    ---    Wire bars
7601 20 40    ---    Wire rods
7601 20 90    ---    Other

HSN code 7602 Aluminium waste and scrap

7602 00 - Aluminium waste and scrap :
7602 00 10 --- Aluminium scrap, namely the following :
clean aluminium lithographic sheets covered by ISRI

code word ‘Tablet’;

new, clean aluminium lithographic sheets covered by

ISRI code word ‘Tabloid’;

mixed low copper aluminium clippings and solids

covered by ISRI code word ‘Taboo’;

clean mixed old alloy sheet aluminium covered by

ISRI code word ‘Taint’/‘Tabor’;

new aluminium can stock covered by ISRI code word

‘Take’;

old can stock covered by ISRI code word ‘Talc’;

shredded aluminium used beverages can (U) scrap

covered by ISRI code word ‘Talcred’;

densified aluminium used beverages can (UBC) scrap

covered by ISRI code word ‘Taldack’;

baled aluminium used beverage can (UBC) scrap

covered by ISRI code word ‘Taldon’;

briquetted aluminium used beverage can (UBC) scrap

covered by ISRI code word ‘Taldork’;

painted siding covered by ISRI code word ‘Tale’;

coated scrap covered by ISRI code word ‘Talent’;

aluminium scrap radiators covered by ISRI code word

‘Talk’;
E.C. aluminium nodules covered by ISRI code word

‘Tall’;

new pure aluminium wire and cable covered by ISRI

code word ‘Talon’;

new mixed aluminium wire and cable covered by ISRI

code word ‘Tann’;

Old pure aluminium wire and cable covered by ISRI

code word ‘Taste’;

old mixed aluminium wire and cable covered by ISRI

code word ‘Tassel’;

aluminium pistons covered by ISRI code word ‘Tarry’;

segregated aluminium borings and turnings covered

by ISRI code word ‘Teens’;

mixed aluminium castings covered by ISRI code word

‘Telic’;

mixed aluminium castings covered by ISRI code word

‘Tense’;

wrecked airplane sheet aluminium covered by ISRI

code word ‘Tepid’;

new aluminium foil covered by ISRI code word

‘Terse’;

New aluminium foil covered by ISRI code word 'Tetra';

Old aluminium foil covered by ISRI code word 'Tesla;

aluminium grindings covered by ISRI code word

‘Thigh’;

sweated aluminium covered by ISRI code word

‘Throb’;

segregated new aluminium alloy clippings and solids

covered by ISRI code word ‘Tooth’;

mixed new aluminium alloy clippings and solids

covered by ISRI code word ‘Tough’;

segregated new aluminium castings, forgings and

extrusions covered by ISRI code word ‘Tread’;

aluminium auto castings covered by ISRI code word

‘Trump’;

insulated aluminium wire scrap covered by ISRI code

word ‘Twang’;

aluminium airplane castings covered by ISRI code

word ‘Twist’;

fragmentizer aluminium scrap (from automobile

shredder) covered by ISRI code word ‘Twitch’;

Aluminium auto or truck wheels covered by ISRI code

word 'Troma' ;

Fragmentizer aluminium scrap from automobile

shredders covered by ISRI code word 'Tweak';

Burnt Fragmentizer aluminium scrap (from automobile
shredders) covered by ISRI code word 'Twire';
Shredded non-ferrous scrap (predominantly aluminium)
covered by ISRI code word 'Zorba';
Aluminium drosses, spatterns, spellings, skimmings
and sweepings covered by ISRI code word 'Thirl'';
New production aluminium extrusions covered by
ISRI code word 'Tata';
All aluminium radiators from automobiles covered by
ISRI code word 'Tally';
Aluminium extrusions '10/10 covered by ISRI code
word 'Toto';
Aluminium extrusions dealer grade covered by the
word 'Tutu';
7602 00 90    --- Other waste and scrap

HSN code 7603 Aluminium powders and flakes

7603 10    -    Powders of non-lamellar structure :
7603 10 10    ---    Aluminium powder for thermit process
7603 10 90    ---    Other
7603 20 00    -    Powders of lamellar structure; flakes

HSN code 7604 Aluminium bars, rods and profiles

7604 10    -    Of aluminium, not alloyed :
7604 10 10    ---    Wire rods
7604 10 20    ---    Bars and rods, other than wire rods
    ---    Profiles :
7604 10 31    ----    Hollow
7604 10 39    ----    Other
    -    Of aluminium alloys :
7604 21 00    --    Hollow profiles
7604 29    --    Other :
7604 29 10    ---    Hard drawn bare aluminium conductors steel
        re-inforced (A.C.S.R.)
7604 29 20    ---    Wire rods
7604 29 30    ---    Bars and rods, other than wire rods
7604 29 90    ---    Other

HSN code 7605 Aluminium wire

    -    Of aluminium, not alloyed :
7605 11 00    --    Of which the maximum cross-sectional
        dimension exceeds 7 mm
7605 19    --    Other :
7605 19 10    ---    Of which the maximum cross-sectional
        dimension exceeds 6 mm but does not
        exceed 7 mm
    ---    Other :
7605 19 91    ----    Hard drawn bare-solid
7605 19 99    ----    Other
    -    Of aluminium alloys :
7605 21 00    --    Of which the maximum cross-sectional
        dimension exceeds 7 mm
7605 29    --    Other :
7605 29 10    ---    Of which the maximum cross-sectional
        dimension exceeds 6 mm but does not exceed 7 mm
7605 29 90    ---    Other

HSN code 7606 Aluminium plates, sheets and strip, of a thickness

exceeding 0.2 mm

    -    Rectangular (including square) :
7606 11    --    Of aluminium, not alloyed :
7606 11 10    ---    Electrolytic plates or sheets
7606 11 90    ---    Other
7606 12 00    --    Of aluminium alloys
    -    Other :
7606 91    --    Of aluminium, not alloyed :
7606 91 10    ---    Circles
7606 91 20    ---    Electrolytic plates or sheets
7606 91 90    ---    Other
7606 92    --    Of aluminium alloys :
7606 92 10    ---    Circles
7606 92 90    ---    Other

HSN code 7607 Aluminium foil (whether or not printed or backed with

paper, paperboard, plastics or similar backing materials)

of a thickness (excluding any backing) not exceeding 0.2 mm

    -    Not backed :
7607 11    --    Rolled but not further worked :
7607 11 10    ---    Ordinarily used for tea chest lining
7607 11 90    ---    Other
7607 19    --    Other :
7607 19 10    ---    Ordinarily used for tea chest lining
    ---    Other :
7607 19 91    ----    Plain
7607 19 92    ----    Embossed
7607 19 93    ----    Perforated or cut-to-shape
7607 19 94    ----    Coated
7607 19 95    ----    Printed
7607 19 99    ----    Other
7607 20    -    Backed :
7607 20 10    --- Ordinarily used for tea chest lining
7607 20 90    ---    Other

7608        Aluminium tubes and pipes
7608 10 00    -    Of aluminium, not alloyed
7608 20 00    -    Of aluminium alloys

HSN code 7609 00 00 Aluminium tube or pipe fittings (for example, couplings,

elbows, sleeves)

HSN code 7610 Aluminium structures (excluding prefabricated buildings

of heading 9406) and parts of structures (for

example, bridges and bridge-sections, towers, lattice masts,

roofs, roofing frameworks, doors and windows and their

frames and thresholds for doors, balustrades, pillars and

columns); aluminium plates, rods, profiles, tubes and the

like, prepared for use in structures

HSN code 7610 10 00 Doors, windows and their frames and thresholds for doors

HSN code 7610 90 Other:

7610 90 10    ---    Structures
7610 90 20    ---    Parts of structures, not elsewhere specified
7610 90 30    ---    Aluminium plates , rods, profiles, tubes and the
        like, prepared for use in structure
7610 90 90    ---    Other

HSN code 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers,

for any material (other than compressed or liquefied gas),

of a capacity exceeding 300 l, whether or not lined or heat insulated,

but not fitted with mechanical or thermal equipment

HSN code 7612 Aluminium casks, drums, cans, boxes and similar

containers (including rigid or collapsible tubular

containers), for any material (other than compressed or

liquefied gas), of a capacity not exceeding 300 l, whether or

not lined or heat-insulated, but not fitted with mechanical

or thermal equipment

7612 10 - Collapsible tubular containers :

7612 10 10 --- Plain
7612 10 20 --- Lacquered
7612 10 30 --- Printed
7612 10 90 --- Other
7612 90 - Other :
7612 90 10 --- Plain
7612 90 20 --- Lacquered
7612 90 30 --- Printed
7612 90 90 --- Other

HSN code 7613 Aluminium containers for compressed or liquefied gas

7613 00    -    Aluminium containers for compressed or liquefied
        gas :
    ---    Low pressure cylinders :
7613 00 11    ----    Plain
7613 00 12    ----    Lacquered
7613 00 13    ----    Printed
7613 00 19    ----    Other
    ---    High pressure cylinders :
7613 00 21    ----    Plain
7613 00 22    ----    Lacquered
7613 00 23    ----    Printed
7613 00 29    ----    Other
    ---    Other :
7613 00 91    ----    Plain
7613 00 92    ----    Lacquered
7613 00 93    ----    Printed
7613 00 99    ----    Other

HSN code 7614 Stranded wire, cables, plaited bands and the like, of

aluminium, not electrically insulated

7614 10 00 - With steel core
7614 90 00 - Other

HSN code 7615 Table, kitchen or other household articles and parts

thereof, of aluminium; pot scorers and scouring or

polishing pads, gloves and the like, of aluminium; sanitary

ware and parts thereof, of aluminium

7615 10 Table, kitchen or other household articles and parts thereof; pot

scorers and scouring or polishing pads, gloves and the like:

- Pressure cookers, solar collectors:

HSN code 7615 10 11 Pressure cookers

7615 10 12 Solar collectors

Utensils:

HSN code 7615 10 21 Non-stick

7615 10 29    - - --    Other
7615 10 30    - - -    Other table, kitchen or household articles
7615 10 40    - - -    Pot scourers and scouring or polishing pads, gloves
        and the like
7615 10 90    - - -    Parts

HSN code 7615 20 Sanitary ware and parts thereof

7615 20 10    ---    Sanitary ware of aluminium and aluminium
        alloys for indoor use
7615 20 20    ---    Parts
7615 20 90    ---    Other

HSN code 7616 Other articles of aluminium

HSN code 7616 10 00 Nails, tacks, staples (other than those of heading 8305),

screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins,

washers and similar articles

Other

7616 91 00 cloth, grill, netting and fencing, of aluminium Wire

7616 99    --    Other :
7616 99 10    ---    Expanded metal of aluminium and aluminium alloys
7616 99 20    ---    Chains
7616 99 30    ---    Bobbins
7616 99 90    ---    Other

Click here to know GST rate on Goods and Services

GST Exemption list of goods and services

Find HSN number or Service tariff code for GST

GST registration guidelines

Indian GST Laws

How to export your goods?

Useful Information about GST:

When to file Annual Return of GST online?

Procedures to claim reduction in output tax liability of GST in India

Process to issue GST Provisional ID to existing VAT payers in India
Procedures to claim Input Tax Credit under GST in India

When to file first Return of GST tax in India?

GST Tax returns filing – Who, How and When?

Step by step procedures to create username and password in GST common portal
How is time of supply accounted under GST Tax Calculation